Fluke 5220A Bedienungsanleitung PDF herunterladen (Seite 117)

Option and Accessory Information

Accessories

6-3

6-4. Rack Slide Kit (M00-280-610)

The 5220A can be rack mounted in a 24-inch deep equipment rack using the Rack Slide

Kit, model M00-280-610. Use the following procedure to install the kit:

1. Remove the horizontal side trim decal from both sides of the instrument.

2. Refer to Figure 6-2. Using the screws supplied with the kit, attach the chassis section

(B) of the slide kit to each side of the unit. Use the center row of mounting holes.

3. Install the cabinet section (D) of the center section (C) in the equipment rack.

4. Pull the center section of the slide out through the front of the equipment rack until it

locks in the extended position.

5. Depress the spring locks on the chassis section (B) and join sections B and C.

6. Push the instrument into the equipment rack and then pull it out to the extended

position. The spring locks should limit the rack slide travel.

6-5. Precision Y5020A Current Shunt

The Model Y5020A is a precision, high-current shunt recommended for use in calibrating

the Model 5220A Transconductance Amplifier. An instruction manual is suppled with the

unit.

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 137 138

Keine Kommentare

Fluke 5220A Bedienungsanleitung Seite 117